top of page

Youth

Public·7 students
Mason Campbell
Mason Campbell

Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom: How to Download, Install, and Customize It





Official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom




If you own a Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile device and want to restore it to its original factory settings, you might be interested in installing the official stock ROM on your device. But what is a stock ROM and why should you install it? In this article, we will answer these questions and guide you through the process of downloading and installing the official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom on your device. We will also show you how to check if the stock ROM is installed correctly, how to troubleshoot common issues, and how to customize your device with the stock ROM.




Official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom



How to download and install Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom




A stock ROM is the official firmware that comes pre-installed on your device by the manufacturer. It contains the operating system, the user interface, the apps, and the features that are specific to your device model and carrier. Installing a stock ROM can help you restore your device to its original state, fix any software issues, improve performance and stability, and update your device to the latest security patches and features.


To install the official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom on your device, you will need to follow some requirements, download some files, and perform some steps. Here is a brief overview of what you will need and what you will do:


Requirements




  • A Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile device with at least 50% battery charge.



  • A USB cable to connect your device to your computer.



  • A Windows computer with an internet connection.



  • A backup of your personal data, such as contacts, photos, videos, messages, etc. Installing a stock ROM will erase all your data on your device, so make sure you have a copy of everything you need.



  • Some patience and attention. Installing a stock ROM is not a difficult process, but it can take some time and it requires following some instructions carefully. Do not skip any step or do anything that is not mentioned in this guide.



Download links




Before you can install the stock ROM on your device, you will need to download some files from the internet. These files include the stock ROM file itself, which contains the firmware for your device, and some tools that will help you flash it on your device. Here are the download links for the files you will need:


  • The official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom file. You can download it from this link. The file name is LAKE_TMO_10_QPUS30.52-16-2-5_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and it has a size of about 1.8 GB.



  • The Motorola USB drivers for Windows. You can download them from this link. The file name is MotorolaDeviceManager_2.5.4.exe and it has a size of about 32 MB.



  • The Fastboot tool for Windows. You can download it from this link. The file name is platform-tools-latest-windows.zip and it has a size of about 4 MB.



Installation steps




After you have downloaded all the files you need, you can proceed with the installation steps. Here is a step-by-step guide on how to install the official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom on your device:


  • Extract the stock ROM file that you downloaded in step 1 using a tool like WinRAR or 7-Zip. You will get a folder named LAKE_TMO_10_QPUS30.52-16-2-5_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.



  • Extract the Fastboot tool that you downloaded in step 3 using a tool like WinRAR or 7-Zip. You will get a folder named platform-tools.



  • Copy all the files from the LAKE_TMO_10_QPUS30.52-16-2-5_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml folder to the platform-tools folder.



  • Install the Motorola USB drivers that you downloaded in step 2 by running the MotorolaDeviceManager_2.5.4.exe file and following the on-screen instructions.



  • Enable USB debugging mode on your device by going to Settings > System > About phone > Tap on Build number seven times > Go back to System > Advanced > Developer options > Enable USB debugging.



  • Power off your device and boot it into Fastboot mode by holding down the Volume Down and Power buttons together for a few seconds until you see the Fastboot logo on the screen.



  • Connect your device to your computer using the USB cable.



  • Open a command prompt window on your computer by pressing the Windows key and R key together, typing cmd, and hitting Enter.



  • Navigate to the platform-tools folder where you copied the stock ROM files by typing cd followed by the path of the folder. For example, if the folder is located on your desktop, type cd C:\Users\YourName\Desktop\platform-tools and hit Enter.



  • Type fastboot devices and hit Enter. You should see your device's serial number in the command prompt window. This means your device is recognized by the Fastboot tool.



  • Type fastboot flash partition gpt.bin and hit Enter. This will flash the partition table on your device.



  • Type fastboot flash bootloader bootloader.img and hit Enter. This will flash the bootloader on your device.



  • Type fastboot reboot-bootloader and hit Enter. This will reboot your device into Fastboot mode again.



  • Type fastboot flash modem NON-HLOS.bin and hit Enter. This will flash the modem on your device.



  • Type fastboot flash fsg fsg.mbn and hit Enter. This will flash the fsg on your device.



  • Type fastboot erase modemst1 and hit Enter. This will erase the modemst1 partition on your device.



  • Type fastboot erase modemst2 and hit Enter. This will erase the modemst2 partition on your device.



  • Type fastboot flash bluetooth BTFM.bin and hit Enter. This will flash the bluetooth on your device.



  • Type fastboot flash dsp adspso.bin and hit Enter. This will flash the dsp on your device.



  • Type fastboot flash logo logo.bin and hit Enter. This will flash the logo on your device.



  • Type fastboot flash boot boot.img and hit Enter. This will flash the boot image on your device.



  • Type fastboot flash system system.img_sparsechunk.0 and hit Enter. This will flash the first chunk of the system image on your device.



  • Repeat the previous step for all the remaining chunks of the system image, changing the number at the end of the file name accordingly. For example, type fastboot flash system system.img_sparsechunk.1 for the second chunk, fastboot flash system system.img_sparsechunk.2 for the third chunk, and so on until you reach the last chunk.



  • Type fastboot flash vendor vendor.img_sparsechunk.0 and hit Enter. This will flash the first chunk of the vendor image on your device.



  • Repeat the previous step for all the remaining chunks of the vendor image, changing the number at the end of the file name accordingly. For example, type fastboot flash vendor vendor.img_sparsechunk.1 for the second chunk, fastboot flash vendor vendor.img_sparsechunk.2 for the third chunk, and so on until you reach the last chunk.



  • Type fastboot flash oem oem.img and hit Enter. This will flash the oem image on your device.



  • Type fastboot erase carrier and hit Enter. This will erase the carrier partition on your device.



  • Type fastboot erase userdata and hit Enter. This will erase the userdata partition on your device.



  • Type fastboot reboot and hit Enter. This will reboot your device normally with the stock ROM installed.



How to check if Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom is installed correctly




After you have installed the stock ROM on your device, you might want to check if it is installed correctly and if everything is working as expected. Here are some ways to verify that:


Verify the software version




One way to check if you have installed the official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom on your device is to verify the software version of your device. To do that, follow these steps:


  • Go to Settings > System > About phone.



  • Scroll down and look for the Build number section.



  • You should see a string that starts with QPUS30.52-16-2-5. This is the software version of the stock ROM that you installed.



  • If you see a different string, it means you have installed a different ROM or you have not installed the stock ROM correctly.



Test the device functionality




Another way to check if you have installed the official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom on your device is to test the device functionality and see if everything is working as expected. To do that, you can try the following things:


  • Check the network connectivity by making a phone call, sending a text message, or browsing the internet using your mobile data or Wi-Fi.



  • Check the camera quality by taking a photo or recording a video using the front or rear camera.



  • Check the battery life by using your device normally and seeing how long it lasts before it needs to be charged.



  • Check the sound quality by playing some music or watching a video using the speaker or headphones.



  • Check the touch screen responsiveness by swiping, tapping, or zooming on the screen.



  • Check the sensors by using apps that require them, such as compass, accelerometer, gyroscope, etc.



  • Check the fingerprint scanner by unlocking your device using your registered finger.



If everything is working fine, it means you have installed the stock ROM correctly and you can enjoy your device with its original features and performance. If you encounter any issues, it means you have installed the stock ROM incorrectly or there is a problem with your device hardware or software. In that case, you can try to reinstall the stock ROM following the steps above or contact Motorola customer support for assistance.


How to troubleshoot common issues with Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom




Sometimes, even after installing the official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom on your device, you might face some issues that affect your device functionality or performance. These issues can be caused by various factors, such as incompatible apps, corrupted files, faulty hardware, etc. Here are some common issues that you might encounter with the stock ROM and how to troubleshoot them:


Bootloop issue




A bootloop issue is when your device gets stuck in a loop of restarting itself without reaching the home screen. This can happen due to various reasons, such as installing a wrong or corrupted ROM, deleting or modifying system files, flashing an incompatible kernel or recovery, etc. To fix this issue, you can try the following methods:


  • Boot into recovery mode by holding down the Volume Down and Power buttons together for a few seconds until you see the Android logo on the screen. Then use the Volume buttons to navigate and the Power button to select.



  • Select Wipe data/factory reset and confirm by selecting Yes. This will erase all your data and settings on your device and restore it to its factory state.



  • Select Reboot system now and wait for your device to boot normally. If this works, it means you have fixed the bootloop issue. If not, proceed to the next method.



  • Boot into Fastboot mode by holding down the Volume Down and Power buttons together for a few seconds until you see the Fastboot logo on the screen. Then connect your device to your computer using the USB cable.



  • Open a command prompt window on your computer and navigate to the platform-tools folder where you copied the stock ROM files earlier.



  • Type fastboot devices and hit Enter. You should see your device's serial number in the command prompt window.



  • Type fastboot flash boot boot.img and hit Enter. This will flash the boot image on your device.



  • Type fastboot reboot and hit Enter. This will reboot your device normally. If this works, it means you have fixed the bootloop issue. If not, proceed to the next method.



  • Boot into Fastboot mode again and connect your device to your computer using the USB cable.



  • Open a command prompt window on your computer and navigate to the platform-tools folder where you copied the stock ROM files earlier.



  • Type fastboot flash system system.img_sparsechunk.0 and hit Enter. This will flash the first chunk of the system image on your device.



  • Repeat the previous step for all the remaining chunks of the system image, changing the number at the end of the file name accordingly. For example, type fastboot flash system system.img_sparsechunk.1 for the second chunk, fastboot flash system system.img_sparsechunk.2 for the third chunk, and so on until you reach the last chunk.



  • Type fastboot reboot and hit Enter. This will reboot your device normally. If this works, it means you have fixed the bootloop issue. If not, you might need to contact Motorola customer support for further assistance.



SIM card issue




A SIM card issue is when your device does not recognize or detect your SIM card, or when you have problems with making or receiving calls, sending or receiving text messages, or accessing mobile data. This can happen due to various reasons, such as a damaged or incompatible SIM card, a faulty SIM card slot, a network outage or restriction, a software glitch, etc. To fix this issue, you can try the following methods:


  • Turn off your device and remove your SIM card. Check if your SIM card is damaged, dirty, or inserted incorrectly. Clean it with a soft cloth and insert it back into your device properly. Turn on your device and see if it recognizes your SIM card.



  • Go to Settings > Network & internet > Mobile network and check if your network mode is set to automatic or manual. If it is set to manual, switch it to automatic and see if it connects to your carrier's network. If it is set to automatic, switch it to manual and select your carrier's network manually and see if it connects.



  • Go to Settings > Network & internet > Mobile network and check if your preferred network type is compatible with your carrier's network. For example, if your carrier supports 4G LTE, make sure your preferred network type is set to 4G LTE or higher. If not, change it accordingly and see if it improves your network connectivity.



  • Go to Settings > Network & internet > Mobile network and check if your data roaming is enabled or disabled. If you are in a different country or region than your carrier's home network, you might need to enable data roaming to access mobile data. However, this might incur additional charges from your carrier, so make sure you are aware of the rates before enabling data roaming.



  • Go to Settings > System > Advanced > Reset options and select Reset Wi-Fi, mobile & Bluetooth. This will reset your network settings to their default values and clear any cached data that might cause network issues. You will need to reconnect to your Wi-Fi networks and pair your Bluetooth devices again after this reset.



  • Contact your carrier and check if there is any network outage or restriction in your area that might affect your service. You can also ask them to verify if your SIM card is activated and compatible with their network.



Battery drain issue




A battery drain issue is when your device consumes more power than usual and runs out of battery faster than expected. This can happen due to various reasons, such as running too many apps in the background, having a high screen brightness or volume level, using GPS or Bluetooth frequently, having a weak signal strength or Wi-Fi connection, having an old or defective battery, etc. To fix this issue, you can try the following methods:


  • Go to Settings > Battery and check which apps are using the most battery power on your device. You can also tap on the three-dot menu icon at the top right corner and select Battery usage since full charge to see a detailed breakdown of how much battery each app has consumed since the last time you charged your device fully. If you see any app that is using more battery than necessary, you can force stop it by tapping on it and selecting Force stop. You can also uninstall it or disable its notifications if you don't need it.



  • Go to Settings > Display and adjust your screen brightness level according to the ambient light conditions. You can also enable Adaptive brightness, which will automatically adjust your screen brightness based on the light sensor of your device. You can also reduce the screen timeout duration, which will turn off your screen automatically after a period of in activity. You can also enable Dark theme, which will change the color scheme of your device to darker tones, which can save battery on devices with OLED screens.



  • Go to Settings > Sound and adjust your volume level according to your preference. You can also enable Do not disturb mode, which will mute all sounds and vibrations except for the ones you allow. You can also disable touch sounds and vibrations, which will reduce the power consumption of your device.



  • Go to Settings > Location and turn off your GPS when you don't need it. You can also change the location mode to Battery saving, which will use less accurate sources of location, such as Wi-Fi and mobile networks, instead of GPS. You can also disable location access for apps that don't need it by tapping on App permission and toggling off the apps you want.



  • Go to Settings > Connected devices and turn off your Bluetooth when you don't need it. You can also unpair any devices that you don't use frequently by tapping on them and selecting Forget. You can also disable Bluetooth scanning, which will prevent your device from searching for nearby Bluetooth devices when Bluetooth is off.



  • Go to Settings > Network & internet and turn off your Wi-Fi when you don't need it. You can also disable Wi-Fi scanning, which will prevent your device from searching for nearby Wi-Fi networks when Wi-Fi is off. You can also switch to Airplane mode, which will turn off all wireless connections on your device, when you are in a place where you don't need them.



  • Go to Settings > Battery and enable Battery saver mode, which will reduce the power consumption of your device by limiting some features and functions, such as background data, animations, sync, etc. You can also set a schedule for Battery saver mode to turn on automatically when your battery level reaches a certain percentage.



  • Go to Settings > System > Advanced > Reset options and select Reset battery calibration. This will reset the battery statistics on your device and recalibrate your battery level indicator. You will need to charge your device fully and use it normally until it drains completely for this reset to take effect.



  • Replace your battery if it is old or defective. If your battery is swollen, leaking, or damaged, you should replace it as soon as possible to avoid any potential hazards or malfunctions. You can contact Motorola customer support or visit a nearby service center to get a new battery for your device.



How to customize Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom




One of the advantages of installing the official Motorola Moto G7 Plus XT1965-T (LAKE) US T-Mobile Stock Rom on your device is that you can customize it according to your preference and taste. You can chang


About

Affirming the reliability of scripture through historical ev...

Students

bottom of page